LOW POWER ELECTRIC DRIVE FOR WELDING EQUIPMENT

Authors

  • V. A. Lebedev Paton Electric Welding Institute of NAS of Ukraine, Ukraine

DOI:

https://doi.org/10.15588/1607-6761-2015-1-2

Keywords:

welding, mechanization, automation systems, electric, regulation, precision

Abstract

The concept of transistor controller construction for low-power electric drives using the original principle of control is presented.
The proposed principle of regulation is close to the relay or oscillatory type actuator, but differs from it by the higher degree of invariance to changes in torque downloads on drive motor shaft.
The feature of the development is that the drive controller fulfills not just a change in the value on the torque motor shaft or jobs - it fulfills almost the rate of disturbances change.
It is shown that new development takes into account the drive features of the basic units of mechanized and automated equipment for arc welding, but can be used in other industrial facilities.
Manufacture and testing facilities are performed in real samples regulators, which characteristics in a simple but efficient construction meets all requirements of systems that are installed in the welding equipment.
It is proposed to expand the use of electric considered at its implementation in integrated circuit design

Author Biography

V. A. Lebedev, Paton Electric Welding Institute of NAS of Ukraine

Doctor of science

References

Лебедев В. А. Современное механизированное оборудование для сварки и наплавки и его технико-технологические возможности. / В. А. Лебедев., С. Ю. Максимов. – Киев : Основа, 2012. – 392 с.

Лебедев В. А. Международная выставка «Сварка Украины 2002» // Автомат. сварка. – 2002. – № 6. – С. 56–59

Можайский В. А. Сварочное оборудование фирмы Lincoln Electric / В. А. Можайский, О. В. Колюпанов, Ф. В. Квасов // Сварочное производство. – 1998. – № 8. – С. 37–41.

Зусин В. Я. Сварка и наплавка алюминия и его сплавов / В. Я. Зусин. – Мариуполь. Рената, 2004. – с. 468

Ключев В. И. Теория электропривода / В. И. Ключев. – М. : Энергоатомиздат ,– 1985.– 560 с.

Попов Е. П. Теория нелинейных систем автоматического управления и регулирования / Е. П. Попов. – М. : Наука, 1979. – 255 с.

Лебедев В. А. Автоколебательные транзисторные электроприводы постоянного тока для сварочного оборудования ИЭС им. Е. О. Патона / В. А. Лебедев, В. Г. Новгородский // Сварочное производство 2003. – № 8. – С. 26–31.

Downloads

How to Cite

Lebedev, V. A. (2015). LOW POWER ELECTRIC DRIVE FOR WELDING EQUIPMENT. Electrical Engineering and Power Engineering, (1), 11–16. https://doi.org/10.15588/1607-6761-2015-1-2

Issue

No. 1 (2015): Electrical Engineering and Power Engineering

Section

Electrotechnics

License

Copyright (c) 2017 V. A. Lebedev

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons Licensing Notifications in the Copyright Notices

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under aCreative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.