Peculiarities of overhead crane movement mechanism operation when powered by a basbar's trolley at action of higher current harmonics

Authors

  • M.І Kotsur Zaporizhzhia Polytechnic National University, Ukraine
  • Yu.S. Bezverkhnia Zaporizhzhia Polytechnic National University, Ukraine
  • D.S. Yarymbash Zaporizhzhia Polytechnic National University, Ukraine
  • І.М. Kotsur Zaporizhzhia Polytechnic National University, Ukraine

DOI:

https://doi.org/10.15588/1607-6761-2022-2-2

Keywords:

trolley, busbar, voltage losses, active losses, model, overhead crane, harmonics

Abstract

Purpose. Analysis and research of interconnected electromagnetic processes between electric drives of overhead crane moving mechanism and trolleys under conditions of higher current harmonics, taking into account design features, nonlinearity of magnetic and electrophysical properties of materials, proximity effects, surface and external surface effects.

Methodology. The research was carried out using methods of electromagnetic field theory, electrical circuit theory, mathematical physics, solving a system of first order differential equations, interpolation, approximation and regression analysis.

Findings. A simulating model of interrelated electromagnetic processes between electric drives of an overhead crane mechanism and current-conducting elements of the power supply system of an overhead crane has been developed. Investigations of electromagnetic processes between the electric drives of the overhead crane mechanisms and the trolleys have been carried out. The laws of voltage losses in the busbar's trolleys from the torque of the asynchronous electric drive have been established. This allowed to determine the maximum permissible distance of overhead crane movement to the feeding point of the busbar's trolley section, at which trouble-free operation is ensured as well as  to determine the number of feeding points of the busbar's trolley sections and the distance between them. This will ensure the same level of voltage losses and active losses in the trolleys at the fundamental harmonic, and taking into account the higher harmonics of the load current.

Originality. .A simulating model of interrelated electromagnetic processes between electric drives of an overhead crane mechanism and current-conducting elements of the power supply system of an overhead crane has been developed. which allows to use integrated parameters of busbar trolleys according to field calculation taking into account skin effect, the shape and location of tires (trolleys) in the busbar, the distances between them and the number of phases of the busbar, depending on the peculiarities of the modes of operation of the electric drive and the distance of the bridge crane to the power point of busbar trolley sections

Practical value. Based on the theoretical research, recommendations to reduce voltage losses and active losses in the trolley from the action of higher harmonic loads to the level of voltage losses and active losses at the fundamental harmonic current have been developed.

Author Biographies

M.І Kotsur, Zaporizhzhia Polytechnic National University

Ph. D, Associate professor, Associate professor of the electrical and electronic apparatuses department of the Zaporizhzhia Polytechnic National University, Zaporizhzhia

Yu.S. Bezverkhnia, Zaporizhzhia Polytechnic National University

Ph. D, Senior lector electrical machine department of the Zaporizhzhia Polytechnic National University, Zaporizhzhia

D.S. Yarymbash, Zaporizhzhia Polytechnic National University

Sci. D, head of electrical machine department of the Zaporizhzhia Polytechnic National University, Zaporizhzhia

І.М. Kotsur, Zaporizhzhia Polytechnic National University

Ph. D, Associate professor, Associate professor of the electrical machine department of the Zaporizhzhia Polytechnic National University, Zaporizhzhia

References

Zare F., Ledwich G. F.(2002). Reduced layer planar busbar for voltage source inverters. IEEE Trans. Power Electron., 17, 4, 508–516 (in English).

Gaoyu, Z., Zhengming, Z., Liqiang, Y. (2013). Study on DC busbar structure considering stray inductance for the back-to-back IGBT-based converter. IEEE:Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, 1213- 1218. DOI: 10.1109/APEC.2013.6520453 (in Eng-lish).

Kotsur, M., Yarymbash, D, Kotsur, I., Bezverkhnia Yu. (2018). Speed Synchronization Methods of the Energy-Efficient Electric Drive System for Induction Motors. IEEE: 14-th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering (TCSET 2018), Lviv-Slavske, Ukraine, 304-307 DOI:10.1109/TCSET.2018.8336208 (in English).

Kotsur M.I., Andrienko P.D., Kotsur I. M., Bliznyakov O.V. (2017). Converter for frequency-current slip-power recovery scheme. Naukovyi Visnyk Natsion-alnoho Hirnychoho Universytetu, 4, 49-54.

Bedkowski, M., Smolka, J., Banasiak, K., Bulinski, Z., Nowak, A. J., Tomanek, T., Wajda, A. (2014). Coupled numerical modelling of power loss generation in busbar system of low-voltage switchgear. Int. J. Thermal Sci., 82, 122–129 (in Eng-lish).

Plesca, A. (2012). Busbar heating during transient conditions. Electric Power Syst. Res., 89, 31–37. DOI: 10.1109/T-AIEE.1915.4765211 (in English).

Fedorov, A.A. (1987). Reference book power engineering of industrial enterprises Т. 1. Power supply. Under the general ed. Fedorov A.A. M.: Gosenergoizdat, 840. (in Russian).

Raputov, B. M. (1990). Electrical equipment for cranes of metallurgical enterprises, Metallurgy, Mos-cow, 272.

Rosskopf, A., Bar, E., Joffe, C. (2014). Influence of linner skin- and proximity effects on conduction in litz wires. IEEE Trans. Power Electron., 29, 10, 5454–5461, DOI: 10.1109/TPEL.2013.2293847 (in Eng-lish).

IEC (61000-3-12: 2004) Sovmestimost´ tekhnichtskikh sredstv elektromagnitnaya. Ograni-chenie garmonicheskikh sostsvlyaiushikh toka, soz-davaemykh tekhnicheskimi sredstvami potreblyae-mymy tokom bolee 16A, no ne bolee 75A (v odnoy faze), podkluchaemykh k nizkovol´tnym sistemam electrosnabzheniya obshshego naznacheniya. Normy i metody ispytaniy. (Electromagnetic com-patibility of technical means. Limit of harmonic cur-rent components created by technical means with a current consumption of more than 16 A, but not more than 75 A (in one phase), connected to low-voltage general-purpose power systems. Norms and methods of testing). (in Russian.).

IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems IEEE standard. London, 1992, 519-1992 (in English).

Popa, I., Dolan, A.I. (2013). Numerical modeling of DC busbar contacts. IEEE: 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), 188 – 193. DOI: 10.1109/OPTIM.2012.6231869 (in English).

Bezverkhnya Yu. S., Kotsur M. I., Yarimbash D.S., Kotsur I. M., Yarimbash S.T., Kilimnik I.M. (2018). Analysis of the shop networks basburs parameters at higher harmonic current actions. Electrical engineer-ing and power engineering, 4, 51-63. DOI :10.15588/1607-6761-2018-4-5.

Bezverkhnia, Y. S., Kotsur, M. I., Yarymbash, D. S., & Kotsur, I. M. (2021). Increasing the efficiency of determining the parameters of trolley busbars based on field simulation. Bulletin of the National Tech-nical University "KhPI". Series: Energy: Reliability and Energy Efficiency, 2 (3), 38–43. https://doi.org/10.20998/2224-0349.2021.02.05

Kotsur M.I., Yarymbash D.S., Bezverkhnya Yu.S., Kotsur I.M. (2020). Determination of a busbar’s pa-rameters by electromagnetic field simulation, 2020 IEEE Problems of Automated Electrodrive. Theory and Practice (PAEP), Kremenchuk, Ukraine, 1-4, doi: 10.1109/PAEP49887.2020.9240811

Kotsur М., Yarymbash, D., Bezverkhnya, Y., & Divchuk, T. (2021). Features of field modeling of electromagnetic processes of trolley busbar. Electri-cal Engineering and Power Engineering, 1, 46–60. https://doi.org/10.15588/1607-6761-2021-1-5

Kotsur M. I., Yarymbash D. S., Bezverkhnya Yu.S., Kotsur I.M. (2019). New approach for voltage drop estimation in the busbars of workshop networks at higher current harmonics influence. Problemele ener-geticii regionale, 1(39), 43-56. – Режим доступу: DOI: 10.5281/zenodo.2650419

Kotsur M. I., Yarymbash D. S., Bezverkhnya Yu.S., Kotsur I.M. (2021). Accuracy Improvement for the Determination of Parameters and Voltage Drops in Busbars, Considering the Networks Power Factor. Problemele energeticii regionale, 3(51), 37-52. DOI: https://doi.org/10.52254/1857-0070.2021.3-51.04

Kotsur M. I., Kotsur I.M., Bezverkhnia Yu. (2017). Increasing of Thermal Reliability of a Regulated In-duction Motor in Non-Standard Cycle Time Condi-tions. IEEE: International Conference on Modern Electrical and Energy Systems (MEES), November 15th - 17th, Kremenchuk Mykhailo Ostrohradskyi National University, Ukraine, 88-91. DOI:10.1109/MEES.2017.8248960

Kopylov I.P. (2001). Mathematical modeling of elec-trical machines, Higher School, Moscow, 327.

Chernykh, I. V. (2008). Modeling of electrical devices in MatLab, SimPowerSystems and Simulink, DMK Press; SPb, 288.

German-Galkin, S. G. (2001). Computer modeling of semiconductor systems in MATLAB 6.0, Korona print, St. Petersburg, 320.

Published

2022-06-30

How to Cite

Kotsur, M., Bezverkhnia, Y., Yarymbash, D., & Kotsur І. (2022). Peculiarities of overhead crane movement mechanism operation when powered by a basbar’s trolley at action of higher current harmonics. Electrical Engineering and Power Engineering, (2), 18–29. https://doi.org/10.15588/1607-6761-2022-2-2