NUMERICAL WITHOUT ITERATION METHOD OF MODELING OF ELECTROMECHANICAL PROCESSES IN ASYNCHRONOUS ENGINES

Authors

  • D. G. Patalakh Zaporozhye National Technical University, Ukraine
  • S. M. Tykhovod Zaporozhye National Technical University, Ukraine https://orcid.org/0000-0003-0748-1735
  • T. M. Kornus Zaporozhye National Technical University, Ukraine

DOI:

https://doi.org/10.15588/1607-6761-2017-2-5

Keywords:

electromechanics processes, asynchronous engines, numeral methods, differential equations

Abstract

Purpose. Development of calculation of electromagnetic and electromechanic transients is in asynchronous engines without iterations.

Methodology. Numeral methods of integration of usual differential equations, programming.

Findings. As the system of equations, describing the dynamics of asynchronous engine, contents the products of rotor and stator currents and product of rotation frequency of rotor and currents, so this system is nonlinear one. The numeral solution of nonlinear differential equations supposes an iteration process on every step of integration. Time-continuing and badly converging iteration process may be the reason of calculation slowing. The improvement of numeral method by the way of an iteration process removing is offered. As result the modeling time is reduced. The improved numeral method is applied for integration of differential equations, describing the dynamics of asynchronous engine.

Originality. The improvement of numeral method allowing to execute numeral integrations of differential equations containing product of functions is offered, that allows to avoid an iteration process on every step of integration and shorten modeling time.

Practical value. On the basis of the offered methodology the universal program of modeling of electromechanics processes in asynchronous engines could be developed as taking advantage on fast-acting.

Author Biographies

D. G. Patalakh, Zaporozhye National Technical University

Postgraduate student

S. M. Tykhovod, Zaporozhye National Technical University

ScD, Assoc. Prof

T. M. Kornus, Zaporozhye National Technical University

Senior Lecture of the department of the electrical and electronic apparatus

References

Pivnyak, G. G., Vinoslavskiy, V. N. (2003). Perekhodnyye protsessy v sistemakh elektrosnabzheniya. Moscow, Energoatomizdat, 548. (in Russian)

Venikov, V. A. (1985). Perekhodnyye elektromekhanicheskiye protsessy v elektricheskikh sistemakh. Moscow, Vysshaya shkola, 536. (in Russian)

Yarymbash, D. (2012). Features of the short-circuit current calculations of the ac graphitization power electrical complex. Electrical Engineering And Power Engineering, 1, 23-30. DOI: 10.15588/1607-6761-2012-1-6. (in Russian)

Yarymbash, D. (2014). The features of the calculation of electrodynamic stability of laminated bus packages of low-voltage circuit of graphitization furnace. Visnyk SevNTU: Seriya: Mekhanika. Enerhetyka. Ekolohiya. 146, 131-136. (in Russian)

Kotsur, M. (2014). Features of the of thermal effect impact on the asynchronous motor with the modified pulse control system in conditions of frequent starts. Electrical Engineering And Power Engineering, 1, 32-36. DOI: 10.15588/1607-6761-2014-1-5

Kopylov, I. P. (2001). Matematicheskoye modelirovaniye elektricheskikh mashin. Moscow, Vysshaya shkola, 327. (in Russian)

Vaskovskiy, Yu. V., Geraskin, A. A. (2012) Mathematical modeling of electromagnetic fields in the squirrel cage induction motor with damaged rotor winding, Tehnicheskaya elektrodinamika, 2. 56 – 61. (in Russian)

Milyih, V. I., Polyakova, N. V. (2013) An analysis of harmonic composition the AC magnetic field associated with a rotating rotor turbine generator, at idle speed and short circuit modes, Electrical Engineering And Power Engineering, 2. 5–12. DOI: 10.15588/1607-6761-2013-2-1 (in Russian)

Mogilnikov, B. C., Oleynikov, A. M., Strelnikov, A. N. (1983) Asinhronnyie dvigateli s dvuhsloynyim rotorom i ih primenenie, Moscow, Energoatomizdat, 120. (in Russian)

Plyugin, V. E. (2013) Numerical simulation of the electromagnetic field of the induction motor with the external massive rotor, Vestnik NTU «KHPI», 51(1024), 66 – 75. (in Russian)

Yarymbash, D., Kotsur, M., Yarymbash, S., & Kotsur, I. (2017). Features of parameter determination of the induction motor substitution circuit for short-circuit mode. Electrical Engineering And Power Engineering, 1, 24-30. DOI: 10.15588/1607-6761-2017-1-4. (in Russian)

Yarymbash, D., Kotsur, M., Yarymbash, S., & Kotsur, I. (2016). Features of three-dimensional simulation of the electromagnetic fields of the asynchronous motors. Electrical Engineering And Power Engineering, 2, 43-50. DOI: 10.15588/1607-6761-2016-2-5. (in Russian)

Pustovetov, M. Kompyuternoye modelirovaniye asinkhronnikh dvigateley i transformatorov / M. Pustovetov. K. Solus. I. Sinyavskiy.- LAP LAMBERT.- 2013.- 206 c. (in Russian)

Persova, М. G., Soloveychik, Yu. G., Temlyakova, Z. S. (2007) A new approach to the design of electrical machines based on numerical simulation, Elektrotehnika, 9, 15–21. (in Russian)

Makeyev, M. S., Kuvshinov, A. A. (2013). Algorithm for calculating the parameters of the equivalent circuit of the asynchronous engine at the catalog data. Vektor nauki TGU, 1 (23), 108-112. (in Russian)

Moshchinskiy, Yu. A., Bespalov, V. Ya., Kiryakin, A. A. (1998). Ascertainment of the equivalent circuit parameters of the asynchronous machine at the catalog data. Elektrichestvo, 4/98, 38-42 (in Russian)

Keoun, D. (2008). OrCAD Pspice. Analiz elektricheskikh tsepey. sPb,: Piter. 640. (in Russian)

Yarymbash, S., Kylymnyk, I., & Yarymbash, D. (2010). Specific determination of equivalent circuit parameters in the furnace loop of the AC graphitizing furnace. Electrical Engineering And Power Engineering, 2, 36-43. DOI: 10.15588/1607-6761-2010-2-6. (in Russian)

GNU Octave [online] Available at: www.gnu.org/software/octave/index.html

Chernykh, I. V. (2008). Modelirovaniye elektrotekhnicheskikh ustroystv v MATLAB, SimPower Systems i Simulink. Moscow, DMK Press,.288. (in Russian)

Published

2018-02-10

How to Cite

Patalakh, D. G., Tykhovod, S. M., & Kornus, T. M. (2018). NUMERICAL WITHOUT ITERATION METHOD OF MODELING OF ELECTROMECHANICAL PROCESSES IN ASYNCHRONOUS ENGINES. Electrical Engineering and Power Engineering, (2), 50–55. https://doi.org/10.15588/1607-6761-2017-2-5